#1 Rated Handyman
House Spouse

Ask House Spouse · Exterior & Weatherproofing · Decks & Outdoor Structures

How much does it cost to refinish a deck and paint the railings?

Short answer

In the Seattle area, refinishing an average 200 to 300 square foot deck and painting or staining the railings typically costs between $1,500 and $3,500. Total pricing depends heavily on wood condition, sanding requirements, existing coating failure, and railing baluster complexity.

DK
Founder · Licensed WA Contractor · 20+ years
(206) 335-7334

Understanding the labor breakdown for deck and railing refinishing

The vast majority of any deck refinishing quote goes toward surface prep, not the actual application of stain or paint. Washing the deck using an appropriate oxygenated cleaner or light pressure wash removes embedded mildew without gouging soft cedar or fir fibers. Once fully dry, orbital sanding removes loose coating, knocks down sharp splinters, and opens the wood pores. Detailed railing balusters demand substantial hand-sanding and detailed brushwork, which often takes twice as long as rolling out the open deck floor.

Paint versus solid and semi-transparent stains in Western Washington

Choosing the right coating is critical under Washington weather patterns. Solid stains and exterior paints provide strong UV protection and hide weathered grain, making them great for railings and older decks. However, standard exterior acrylic house paint forms an impermeable barrier on horizontal walk surfaces, causing it to trap dampness and peel quickly. Penetrating oil-based or high-performance hybrid stains soak directly into the wood pores, allowing seasonal moisture to escape without lifting the coating. If you prefer painted railings, pairing them with an oil or hybrid stain on the floor boards offers the longest-lasting combination.

Why moisture content dictates your project timeline

In King and Snohomish counties, the exterior staining window is brief. Wood must maintain a moisture content below 15 percent before applying any finish. Applying stain to saturated cedar locks in dampness, triggering early mold growth beneath the finish and rapid peeling within six months. Professional projects require at least two to three days of dry, moderate weather prior to cleaning, a full 48-hour drying period before sanding, and stable temperatures during application and initial cure.

Bundling repairs with your maintenance visit

Before putting down fresh stain, address underlying carpentry needs. Replacing cupped or split deck boards, swapping stripped decking screws, and tightening loose railing posts is much easier prior to finishing. My House Spouse can handle targeted board repairs, sand prep, and railing refits as part of our scheduled handyman visits, saving you money compared to hiring separate specialty contractors.

Why it happens

Pacific Northwest moisture is brutal on exterior horizontal wood surfaces. Months of steady rain combined with shaded tree canopies encourage moss, algae, and mildew growth. Standing water penetrates grain fissures, causing wood fibers to swell, cup, and shed previously applied coatings. Railings often fail at joints and post tops where end grain absorbs runoff directly. Applying paint or solid stain over damp, unwashed, or peeling surfaces traps moisture beneath the film. Once warm summer days arrive, that trapped moisture vaporizes, forcing the paint to bubble, crack, and flake off, requiring deep prep work rather than a quick wash and topcoat.

How to diagnose it

  1. 1Pour a small cup of water onto high-traffic deck boards. If it beads, the seal is intact. If it absorbs immediately, the wood is bare and unprotected.
  2. 2Inspect the vertical balusters and horizontal top rails for peeling, blistering, or gray, weathered wood fibers.
  3. 3Gently poke the bottom edges of railing posts and deck board ends with a flathead screwdriver to ensure the wood is firm and free of soft rot.
  4. 4Check for loose or corroded screws and nails that have backed out due to seasonal timber movement.
  5. 5Check shaded or north-facing zones for dark slime or green algae that must be chemically treated before sanding or coating.

DIY vs. professional

DIY-friendly if…

Take on the project yourself if the deck is small, wood is sound, and you have several consecutive dry, warm summer days to properly wash, dry, sand, and coat it.

Call a pro when…

Call a pro if you need structural board replacement, have high second-story railings, face extensive peeling paint that requires machine sanding, or lack consecutive dry days.

Cost expectations

$1,200–$4,200typical WA labor + materials

Covers professional cleaning, sanding prep, minor fastener repairs, and two coats of premium finish for decks between 150 and 400 square feet.

Every House Spouse job is quoted in writing before we start. 12-month workmanship warranty included.

What we see on Home Health Assessments

74%of homes assessed

Around 74% of PNW roofs we assess show active moss establishment — accelerates shingle wear by an estimated 3–5 years if untreated.

Caught early on assessment: $220–$650 · Left until failure: $3,500–$22,000

A Home Health Assessment inspects deck ledger flashing, post footings, and rail stability to catch costly hidden framing rot long before surface refinishing begins.

How the Home Health Assessment works

Services we'd bring to this job

Where we handle this

We answer this question on real Home Health Assessments across Snohomish and King County.